Can flood barriers be installed on a concrete block (CBS) home?
Yes. Rubicon commonly installs on CBS construction in Southwest Florida. Anchors engage structural concrete or block after measurement confirms mounting locations.
Can flood panels be mounted to stucco?
Mounting goes through stucco to sound substrate behind it. Stucco alone is not treated as the structural attachment. Field review checks finish condition at proposed post locations.
Can drilling into stucco cause water leaks?
Unsealed or poorly detailed penetrations can become water paths. Professional install seals fasteners and track edges and uses exterior-appropriate sealant. Homeowners should inspect caulk over time and request re-seal if it cracks or pulls away.
Will flood barrier installation crack my stucco?
Drilling on sound substrate with correct technique is standard. Existing cracks, hollow areas, or prior repairs need judgment before new holes. Rubicon flags substrate issues during measurement rather than promising every wall is ideal.
Can flood barrier anchors create water intrusion?
Any fastener through the weather face can if left unsealed or if sealant fails later. That is a legitimate building-envelope risk — and exactly why sealing, inspection, and maintenance belong in the install conversation.
Can flood barriers be installed around hurricane-impact doors and sliders?
Often yes, when jambs, clearances, and mounting surfaces allow. Impact frames are not automatically a barrier — opening protection is a separate system. Measurement confirms whether posts conflict with frames, tracks, or hardware.
What happens to mounting holes if I remove the system later?
Holes remain unless properly patched and sealed. Ask about removal and make-good options before install if resale or remodel is likely. Old unsealed holes can leak — sealing after removal matters.
